Analysis of energy consumption of an electrical mining truck
Abstract
This article is devoted to the search for a calculation method to determine the physical work of the vehicle in transport operations with certain technical characteristics of electric mine dump trucks. As usual, the manufacturer provides the engine, transmission, chassis and overall performance of the vehicle. These parameters are sufficient to determine the vehicle's physical transport performance and energy efficiency at standard test locations, as well as specific operating conditions. In the article, the detection of the electric motor on the shaft of electric dump trucks with an electronic control system was analyzed. The fuel injection parameters of the engine operation are carried out based on the values obtained using the electronic control unit.
References
[2] Mukhitdinov, A., Khakimov Sh, Mukhitdinov, A., Abdurazzokov, U., Improving the methodology for increasing the operating efficiency of trucks, monograph, -T.:Fan va texnologiya, 2017, 200p
[3] Mukhitdinov, A., Abdurazzokov, U., Ziyaev, K., & Makhmudov, G. (2023). Method for assessing the vehicle energy efficiency on a driving cycle. 060028. https://doi.org/10.1063/5.0114531.
[4] Abdurazzokov, U., Sattivaldiev, B., Khikmatov, R., & Ziyaeva, S. (2021a). Method for assessing the energy efficiency of a vehicle taking into account the load under operating conditions. E3S Web of Conferences, 264,05033. https://doi.org/10.1051/e3sconf/202126405033
[5] Mavlonov, J., Ruzimov, S., Tonoli, A., Amati, N., & Mukhitdinov, A. (2023). Sensitivity Analysis of Electric Energy Consumption in Battery Electric Vehicles with Different Electric Motors. World Electric Vehicle Journal, 14(2), 36. https://doi.org/10.3390/wevj14020036.
[6] Akmal Mukhitdinov, Umidbek Yusupov, Sobit Tukhtamishov, Quvondiq Urinbayev; Results of the study of the influence of an average longitudinal slope of routes on the life of tires in the quarry. AIP Conf. Proc. 11 March 2024; 3045 (1): 040041. https://doi.org/10.1063/5.0197301.
[7] Akmal Mukhitdinov, Sobit Tuxtamishov, Calculation Method for Determining the Dependence of the Torque on the Engine Shaft on the Amount of Injected Fuel, ICTEA: International Conference on Thermal Engineering, 2024.
