Determination of torque on the engine shaft by the amount of fuel injected

  • Akmal Mukhitdinov Tashkent State Transport University
  • Sobit Tukhtamishov Tashkent State Transport University
Keywords: engine, specific fuel consumption, torque, power, angular velocity, cycle

Abstract

This article is devoted to the search for a calculation method to determine the physical work of a car in transport operations with certain technical characteristics of cars. As usual, the manufacturer provides the engine, transmission, chassis and overall performance of the car. These parameters are sufficient to determine the vehicle's physical transport performance and energy efficiency at standard test locations, as well as specific operating conditions. The article analyzed the determination of the value of the torque on the shaft of the engine of transport and technological vehicles with an electronic control system based on the amount of injected fuel. Comparative methods of engine power utilization coefficients, the effect of road parameters on the amount of injected fuel, and methods of determining transport work were analyzed. The fuel injection parameters of the engine operation are carried out based on the values obtained using the electronic control unit.

References

[1] A.A. Mukhitdinov, Methodology for choosing control modes for the engine and transmission of a car: monograph / Ross. acad. Sci. - Moscow: VINITI: IPTIL, 2003. – 166 p.
[2] Mukhitdinov, A., Khakimov Sh, Mukhitdinov, A., Abdurazzokov, U., Improving the methodology for increasing the operating efficiency of trucks, monograph, -T.:Fan va texnologiya, 2017, 200p
[3] Mukhitdinov, A., Abdurazzokov, U., Ziyaev, K., & Makhmudov, G. (2023). Method for assessing the vehicle energy efficiency on a driving cycle. 060028. https://doi.org/10.1063/5.0114531.
[4] Abdurazzokov, U., Sattivaldiev, B., Khikmatov, R., & Ziyaeva, S. (2021a). Method for assessing the energy efficiency of a vehicle taking into account the load under operating conditions. E3S Web of Conferences, 264,05033. https://doi.org/10.1051/e3sconf/202126405033
[5] Mavlonov, J., Ruzimov, S., Tonoli, A., Amati, N., & Mukhitdinov, A. (2023). Sensitivity Analysis of Electric Energy Consumption in Battery Electric Vehicles with Different Electric Motors. World Electric Vehicle Journal, 14(2), 36. https://doi.org/10.3390/wevj14020036.
[6] Akmal Mukhitdinov, Umidbek Yusupov, Sobit Tukhtamishov, Quvondiq Urinbayev; Results of the study of the influence of an average longitudinal slope of routes on the life of tires in the quarry. AIP Conf. Proc. 11 March 2024; 3045 (1): 040041. https://doi.org/10.1063/5.0197301.
[7] Akmal Mukhitdinov, Sobit Tuxtamishov, Calculation Method for Determining the Dependence of the Torque on the Engine Shaft on the Amount of Injected Fuel, ICTEA: International Conference on Thermal Engineering, 2024.
Published
2024-06-30
How to Cite
Mukhitdinov, A., & Tukhtamishov, S. (2024). Determination of torque on the engine shaft by the amount of fuel injected. Journal of Transport, 1(2), 154-157. https://doi.org/10.56143/2181-2438-2024-2-154-157
Section
Automotive Service

Most read articles by the same author(s)